General Specifications; Electrical Specifications; General Safety Information - World Dryer XA5 User Manual

Description
World Dryer warm air hand dryer, powered by a high speed universal motor, delivering 2300 Watts of drying power. This hand dryer
runs on 115 Volts AC, 208/220-240 Volts AC, or 277 volts AC electrical supply, depending on model. Automatic and push-button
models are represented in this product group. This appliance is intended for use in hand drying, contributing to hygienic and cost
effective hand sanitation. This hand dryer may be used in commercial, industrial, office and public facility environments.

General Specifications

Basic Models Nozzle Drying Cycle
(D)XA Fixed Automatic
(D)A Fixed* 30/40 Seconds 11.38" x 9.62" x 8.12"
(*) Rotating Nozzle Option

Electrical Specifications

Models Type
(D) XA5 Automatic
(D) A5 Push-button
(D) XA52 Automatic
(D)A52 Push-button
(D) XA54 Automatic
(D)A54 Push-button
(D) XA548 Automatic
(D)A548 Push-button
(D) XA57 Automatic
(D)A57 Push-button

General Safety Information

DANGER
• Always disconnect the power source before servicing or installing the hand dryer.
DANGER
• This hand dryer must be properly grounded (Earthed) for safe operation. An identified ground connection point is supplied on the
hand dryer's wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Use only the electrical power (voltage and frequency) specified for the model hand dryer being installed.
• Connect the hand dryer to the nearest suitable distribution panel.
• To limit a voltage drop, and insure efficient operation, use wire gauge as required by local or National Electrical Code.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code
#210-20.
• All automatic model hand dryers must have a dedicated 20 Amp circuit as required by Underwriters Laboratories, Inc. (UL).
• Route all field wiring away from any moving parts within the hand dryer.
CAUTION
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the
hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Dimensions (WxDxH)
11.38" x 9.62" x 8.12"
Electrical Input
115 VAC, 60 Hz
115 VAC, 60 Hz
115 VAC, 60 Hz
115 VAC, 60 Hz
208-230 VAC, 60 Hz
208-230 VAC, 60 Hz
220-240 VAC, 50 Hz
220-240 VAC, 50 Hz
277 VAC, 60 Hz
277 VAC, 60 Hz
Failure to disconnect the power source before installation or servicing can
result in serious injury or death from electric shock.
Failure to properly ground this unit could result in severe electrical shock
and/or death.
Risk of fire, personal injury or property damage are possible if local codes,
NEC codes or safety recommendations are not followed.
Improper mounting could result in personal injury or property damage.
Amperage Watts
20 2300
20 2300
15 1725
15 1725
10 2300
10 2300
10 2300
10 2300
8.5 2300
8.5 2300
2
Weight Cover Material
18 / 29 lbs Steel/Cast Iron
18 / 29 lbs Steel/Cast Iron
(cULus Listed, E19860,
CE TUV-GS)