Storing And Caring For The Product - Champion CHDS210 User Manual

The vacuum cleaners suction power appears low.
The dust collection system does not close correctly.
The vacuum cleaner produces odors the first few times it is used.

Storing and caring for the product

The flexible suction pipe (5) can be disconnected from the appliance before putting it away. Press the locking buttons of the flexible suction pipe (6)
and disconnect the flexible suction pipe (5). T he suction pipe (3) with the combined brush (4) may be stored by hooking them to the appliance with
the suitable couplings (12 or 17) [FIG. F2, F3].
ASSISTANCE AND WARRANTY
Champion leaves a 2-year warranty from the date of purchase. The warranty does not cover any part that may be defective due to damage from
transport or accidental drops, incorrect installation or inadequate electrical system, repairs or alterations made by unauthorized personnel, poor or
incorrect maintenance and cleaning and/or usage that does not comply with the instructions in this manual.
Champion declines all responsibility for any damage that may directly or indirectly be caused to persons, property and pets as a result of failure to
comply with all the instructions provided in the instructions and warnings manual regarding appliance installation, use and maintenance.
Makadamgatan 14 I 254 64 Helsingborg I Sweden
Champion ®
info@championnordic.se
Designed in Sweden I Assembled in China
• Power regulator (7) at a minimum, raise the suction power.
• The dust container (16E) is full: clean the container.
• The filters are clogged: clean or replace the filters.
• The safety interlock (16C) does not allow the dust collection system to
be inserted (16) if the HEPA premotor filter (16D) is absent. Make sure
the HEPA premotor filter is present (16D) and it is fitted correctly.
• Decrease the suction power by the electronic power regulator (7) or on
the manual air flow regulation device (2).
EN