Download Print this page

Champion CHDS210 User Manual page 3

Hide thumbs Also See for CHDS210:

Advertisement

Available languages
  • EN

Available languages

Accessories
Combination carpet/floor brush (4)
Adjust the combination brush according to the type of
flooring, using the brush position toggle switch (4A)
[FIG. D1]: B rush position toggle switch (4A) set to
symbol for hard flooring.
Brush position toggle switch (4A) set to
symbol for rugs and carpeting.
Crevice tool (21A):
To clean corners and crevices, such as radiators, skirting
boards, blinds and awnings.

Upholstery nozzle (21B):
To clean sofas, armchairs, upholstered chairs and curtains.
Dusting nozzle (21C):
To clean small objects, audio and TV appliances, computers
and furniture.

Parquet brush (21D):
Special brush to clean parquet floors.
Assembly
Connect the flexible suction pipe (5) to the suction coupling (11) of the
appliance rotating the base until the locking
buttons of the flexible suction pipe click in their seat (6) indicating proper
fastening.
[FIG. B1]. Connect the handle (1) of the flexible pipe to the suction pipe
(3). Adjust the length of the telescopic pipe by pressing the adjustment
button (3A) in the direction of the arrow and removing or retracting the
adjustable telescopic pipe (3B)
[FIG. C1]. Select the combination brush (4) or the accessory (21) suited
to the surface to be cleaned and connect the part to the telescopic pipe
(3).
USE
Pull the power cable (14) completely up to the yellow mark, and insert
the plug into the socket. The yellow mark on the cable is before the end
part of the cable marked in red.
NOTE: The accessories can be connected to the suction telescopic
pipe (3) or directly to the handle (1).
Do not pull the cable out to the red mark.
Using the vacuum cleaner with the cable fully or partly wound involves
an overheating hazard!
NOTE: A new appliance can develop odours the first few times it is used.
These odours are harmless and disappear shortly afterwards. Ventilate
the room if neaded.
Press the ON/Off button (8) once to switch the vacuum
cleaner on [FIG. F1]. Adjust the suction force with the electronic
power regulator (7). 
 M inimum: for curtains, fine and delicate
fabrics. 
 A verage: for standard cleaning, sofas, armchairs,
upholstered chairs, rugs and carpets. Maximum: for smooth
floors. The suction power can also be changed with the manual adjusting device of the air flow (2) found on the handle (1) [FIG. E1].
Closed: Increases the suction power. Open: Reduces the suction power.
8
7
9
10
15
14
13
12
16A
16B
16C
16D
16E
21A
21B
21C
21D
[B1]
[B1]
[C1]
[C1]
[D1]
[D1]
[E1]
[E1]
4
4
4A
4A
[F2]
[F2]
[ F3]
[ F3]
17
P
P
[G3]
[G3]
[G2]
[G2]
16B
11
17
18
21
2
2
3A
1
1
3B
[F1]
[F1]
8
15
2
2
[G1]
[G1]
12
9
P
P
[G4]
18
EN
19
20
19

Advertisement

loading