Download Print this page

Storing And Caring For The Product; Warranty - Champion CHDS210 User Manual

Hide thumbs Also See for CHDS210:

Advertisement

Available languages
  • EN

Available languages

The vacuum cleaners suction
power appears low.
The dust collection system does
not close correctly.
The vacuum cleaner produces
odors the first few times it is used.

Storing and caring for the product

The flexible suction pipe (5) can be disconnected from the appliance before putting it away. Press
the locking buttons of the flexible suction pipe (6) and disconnect the flexible suction pipe (5). The
suction pipe (3) with the combined brush (4) may be stored by hooking them to the appliance with
the suitable couplings (12 or 17) [FIG. F2, F3].

Warranty

Champion Nordic guarantees that this product is free from manufacturing defects in
terms of materials and workmanship during a period of 2 years in Sweden, Norway,
Denmark and Finland. This warranty period begins on the day the product is purchas-
ed or delivered. Champion Nordic has no obligation to repair or replace products that
are not accompanied by a valid proof of purchase. This warranty applies only to pro-
ducts purchased and used for home use and does not cover damage resulting from
abuse, failure to comply with the instructions from Champion Nordic, cases in which
the product has been modified or subjected to unauthorized repair, improper packa-
ging on the part of the owner, normal wear and tear, or improper handling on the part
of a transport company.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
Power regulator (7) at a minimum, raise the suction power.
The dust container (16E) is full: clean the container.
The filters are clogged: clean or replace the filters.
The safety interlock (16C) does not allow the dust collec-
tion system to be inserted (16) if the HEPA premotor filter
(16D) is absent.
Make sure the HEPA premotor filter is present (16D) and it
is fitted correctly.
Decrease the suction power by the electronic power regula-
tor (7) or on the manual air flow regulation device (2).
Champion ®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
info@champion.se
EN
6

Advertisement

loading