Oil Pump Installation - KSR Moto T58 - ZION 125 Repair Manual

ENGINE
2. Check the cearance between the outside runner (2) and the
pump body (3).
Allowable Limit: 0.21 mm
3. Check clearance of runners (4).
Allowable Limit: 0.18 mm

OIL PUMP INSTALLATION

1.
2.
TORQUE LIST
PART NO. TORQUE
1 5-9 Nm
For screws that are not listed use standard values (page 10).
TROUBLESHOOTING - LUBRICATION
FAILURE
Decrease of machine oil
Engine overheated or burnt out/ Seized
piston
its on spark plug
62
CAUSE
Natural consumption of engine oil.
Engine oil leak.
Wear and improper installation of
the piston ring.
Absence of oil or oil pressure too
low.
Air inside the lubrication system.
Oil path blocked.
-
1
TO DO
Consumption: ~ 1L/ 800km
Check the whole lubrication system
for leaks.
Check the piston rings as de-
scribed.
Check oil level, settings and tight-
ness of the lubrication system.
Bleed the lubrication system.
Check the whole lubrication system
for leaks.
Check the carburetor/ oil pump
gaswire settings
Replace the oil to the recommend-
ed one. Consider when the vehicle
is not often in use the oil should be
replaced at least every year.
3
2
4