Ignition Coil Disassembly - KSR Moto T58 - ZION 125 Repair Manual

ELECTRICAL SYSTEM/ IGNITION SYSTEM
INSPECTION ITEM
Main switch
Trigger
Primary ignition coil
Secondary ignition coil
Ground

IGNITION COIL DISASSEMBLY

1. Disassemble the related cover parts.
2. Disassemble the spark plug cap.
3. Disassemble the primary ignition coil.
4.
nition coil.
5. Reassemble in reverse order.
NOTE
The primary coil is installed in accordance with the black/ white
wire.
COIL INSPECTION
1. Measure the resistance between terminals of coil (between 1
and 2).
2. If the resistance value is within standard value range the coil
is good.
3.
place it.
4. Measure the resistance value between the wire of spark plug
cap (with the spark plug) and the terminal (between 1 and 3).
5. If the resistance value is within standard value range the pri-
mary coil is good.
6.
7. Remove the spark plug cover. Measure the resistance value
between the wire of spark plug cap and the terminal (be-
tween 1 and 4)
108
TESTING TERMINAL
red/white - red
blue/ white - white/ green
black/ white - black
black/white - spark plug cover
black and ground
STANDARD VALUE (25 °C)
Conducted main switch at off
Conducted
-
-
2
1
2
3
1
4
2
1