ENGINE
3. Dismantle the guide pin (3).
4. Take off the oil seal (4).
5
4
5. Take down the left driven wheel (5).
3
CLUTCH SPRING INSPECTION
1. Measure the free length (C) of the clutch spring.
Allowable limit (C): 140 mm
C
DRIVEN DISC ASSEMBLY
1. Assemble the driven disc in reverse order.
CLUTCH INSPECTION
1
1. Check abrasion of the friction panel of clutch (1).
2. Measure the thickness (A) of the friction pnael
Allowable limit (A): 1.5 mm
A
CLUTCH ASSEMBLY
1. Assemble in reverse order.
CLUTCH DRUM INSPECTION
A
1. Check abrasion of the outside sleeve of the clutch.
2. Measure the inner diameter (A) of the outside sleeve.
Allowable limit (A): 125.5 mm
66