Charge Coil Of Generator Inspection - KSR Moto T58 - ZION 125 Repair Manual

ELECTRICAL SYSTEM/ CHARGING SYSTEM

CHARGE COIL OF GENERATOR INSPECTION

1. Remove the center body.
2. Disassemble 3P plug (1) of the generator.
3. Measure the resistance value between each white (W) coil of
the plug with an multimeter.
Standard value:
4.
stator.
NOTE
Inspection to charging coil of generator can be performed on en-
gine.
GENERATOR REPLACEMENT
1. Remove the generator cover (1) with the stator (2).
2. To remove the stator, remove the three allen screws (3) and
the two screws (4).
3.
4.
5. Reassemble in reverse order.
TROUBLESHOOTING - CHARGING SYSTEM
104
(20°C)
2
1
3
4
5
6
6