Note About Ergonomics; General; Figure - FLIR GF300 User Manual

11 A note about ergonomics

11.1 General

To prevent overstrain injuries, it is important that you hold the camera ergonomically cor-
rect. This section gives advice and examples on how to hold the camera.
Note Please note the following:
• Always tilt the viewfinder to fit your work position.
• Always adjust the viewing angle of the display to fit your work position.
• Always adjust the camera grip to fit your work position.
• When you hold the camera, make sure that you support the camera housing with your
left hand too. This decreases the strain on your right hand.

11.2 Figure

27
#T559157; r. AH/45951/45951; en-US