FLIR GF300 User Manual page 182

22 Technical data
Detector data
Sensor cooling
Detects following gases
Electronics and data rate
Full frame rate
Image presentation
Display
Viewfinder
Automatic image adjustment
Manual image adjustment
Image presentation modes
Image modes
Measurement
Temperature range
Accuracy
Measurement analysis
Spotmeter
Area
Profile
Difference temperature
Reference temperature
Emissivity correction
Reflected apparent temperature correction
Measurement corrections
#T559157; r. AH/45951/45951; en-US
Stirling Microcooler (FLIR MC-3)
Benzene, Ethanol, Ethylbenzene, Heptane, Hex-
ane, Isoprene, Methanol, MEK, MIBK, Octane,
Pentane, 1-Pentene, Toluene, Xylene, Butane,
Ethane, Methane, Propane, Ethylene, Propylene
60 Hz
Built-in widescreen, 4.3 in. LCD, 800 × 480 pixels
Built-in, tiltable OLED, 800 × 480 pixels
Continuous/manual; linear or histogram based
Level/span
IR image, visual image, high sensitivity mode
(HSM)
–20°C to +350°C (–4°F to +662°F)
±1°C (±1.8°F) for temperature range (0°C, to
+100°C, +32°F to +212°F) or ±2% of reading for
temperature range (>+100°C, >+212°F)
10
5 boxes with max./min./average
1 live line (horizontal or vertical)
Delta temperature between measurement func-
tions or reference temperature
Manually set or captured from any measurement
function
Variable from 0.01 to 1.0 or selected from editable
materials list
Automatic, based on input of reflected temperature
Reflected temperature, distance, atmospheric
transmission, humidity, external optics
170