FLIR GF300 User Manual page 222

22 Technical data
Detector data
Detector type
Spectral range
Detector pitch
Sensor cooling
Detects following gases
Electronics and data rate
Full frame rate
Image presentation
Display
Viewfinder
Automatic image adjustment
Manual image adjustment
Image presentation modes
Image modes
Measurement
Temperature range
Accuracy
Measurement analysis
Spotmeter
Area
Profile
Difference temperature
Reference temperature
Emissivity correction
Reflected apparent temperature correction
Measurement corrections
#T559157; r. AH/45951/45951; en-US
Focal plane array (FPA), cooled InSb
Built-in cold band pass filter 4.52–4.67 µm
30 µm
Stirling Microcooler (FLIR MC-3)
Carbon Monoxide, Nitrous Oxide, Ketene, Ethe-
none, Butyl Isocyanide, Hexyl Isocyanide, Cyano-
gen Bromide, Acetonitrile, Acetyl Cyanide,
Chlorine Isocyanate, Bromine Isocyanate, Methyl
Thiocyanate, Ethyl Thiocyanate, Chlorodimethylsi-
lane, Dichloromethylsilane, Silane, Germane,
Arsine
60 Hz
Built-in widescreen, 4.3 in. LCD, 800 × 480 pixels
Built-in, tiltable OLED, 800 × 480 pixels
Continuous/manual; linear or histogram based
Level/span
IR image, visual image, high sensitivity mode
(HSM)
–20°C to +300°C (–4°F to +572°F)
±1°C (±1.8°F) or ±1% of reading for temperature
range 0°C to +300°C (+32°F to +572°F)
10
5 boxes with max./min./average
1 live line (horizontal or vertical)
Delta temperature between measurement func-
tions or reference temperature
Manually set or captured from any measurement
function
Variable from 0.01 to 1.0 or selected from editable
materials list
Automatic, based on input of reflected temperature
Reflected temperature, distance, atmospheric
transmission, humidity, external optics
210