Flir Gf306 14.5 - FLIR GF300 User Manual

22 Technical data
22.12 FLIR GF306 14.5°
P/N: 44201-0101
Rev.: 45202
General description
The FLIR GF306 is an infrared camera for optical gas imaging (OGI) that visualizes and pinpoints gas
leaks—especially of sulfur hexafluoride (SF
age equipment or shut down the operation. The portable camera also greatly improves operator safety by
detecting emissions at a safe distance, and helps to protect the environment by tracing leaks of environ-
mentally harmful gases.
SF is used in the electric power industry as an insulator and quenching medium for gas-insulated substa-
6
tions and circuit breakers. The gas is also used in magnesium production and semiconductor manufac-
ture. Ammonia is produced in ammonia plants, and is used mainly for the production of fertilizers.
Benefits:
• Improved efficiency: The FLIR GF306 reduces revenue loss by pinpointing even small gas leaks
quickly and efficiently, and from a distance. It also reduces inspection time by allowing a broad area to
be scanned rapidly and without the need to de-energize components in the high-voltage area. The
wireless connectivity of the camera allows you to connect to smart phones or tablets for the wireless
transfer of images or the remote control of the camera. The FLIR GF306 can also be used for temper-
ature measurement, which makes it even more useful for the predictive maintenance of high-voltage
equipment.
• Increased worker safety: OGI allows gas leaks to be detected in a non-contact mode and from a safe
distance. This prevents electrical exposure to personnel working in a high-voltage area. With a GF306
gas imaging camera, it is easy to scan areas of interest that are difficult to reach with conventional
methods. The camera is ergonomically designed, with a bright LCD and tiltable viewfinder, which facil-
itates its use over a full working day.
• Protecting the environment: SF
ment, and is usually governed by regulations. SF
than carbon dioxide. Even small leaks can be detected and documented using the FLIR GF306
camera.
Detects the following gases: sulfur hexafluoride, acetyl chloride, acetic acid, allyl bromide, allyl chloride,
allyl fluoride, ammonia, bromomethane, chlorine dioxide, ethyl cyanoacrylate, ethylene, furan, hydrazine,
methylsilane, methyl ethyl ketone, methyl vinyl ketone, propenal, propene, R-134a, tetrahydrofuran, tri-
chloroethylene, uranyl fluoride, vinyl chloride, vinyl cyanide, vinyl ether.
Licensing and classification
License information
Imaging and optical data
IR resolution
Thermal sensitivity/NETD
Field of view (FOV)
Minimum focus distance
Focal length
Lens identification
F-number
Focus
#T559157; r. AH/45951/45951; en-US
) and ammonia—without the need to de-energize high-volt-
6
is a well-known greenhouse gas that causes harm to the environ-
6
has a global warming potential 24 000 times higher
6
Interchangeable lens version of the FLIR GF3XX
series requires US Department of State License
and will be subject to limitations on resale, except
inside US. Allow a minimum of 90 days after appli-
cation submittal for approval.
320 × 240 pixels
<15 mK @ +30°C (+86°F)
14.5° × 10.8°
0.5 m (1.64 ft.)
38 mm (1.49 in.)
Automatic
1.5
Automatic (one touch) or manual (electric or on the
lens)
117