To Replace A Load Cell - Electrolux W4400H Service Manual

Weighing equipment (Optional equipment)
To replace a load cell
• Machines without tilt function: Remove nut + bolt (A).
20
• Use a suitable jack to lift under the frame at the corner where the load
cell is to be replaced.
• Insert a suitable object as a chock beneath the frame, to remove risk of
injury and machine damage.
• Machines with tilt function: Remove nut + bolt (A) and remove the
wheel.
• Remove nut (B). Use a socket wrench to remove the bolt.
• Disconnect the load cell cable at the scale unit and remove the strap.
• Remove nuts and bolts (C).
• Remove the faulty load cell and fit the new, assembly is reverse of dis-
assembly.
Install the new load cell as indicated by arrow on side of load cell!
20
20
Washer
Illustration shows a machine with the tilt function.
C
Spacer
Load cell
B
A
177
502