Safety Precautions Safety Precautions The machine is only intended for water-wash use. Do not allow minors to use the machine. Do not hose down the machine with water. The machine's door lock must under no circumstances be bypassed. If the machine develops a fault, this must be reported to the person in charge as soon as possible.
General General Control panel The control panel is used to choose the wash program with options and to start and stop the machine. The panel houses a control knob and a display. Some machines also have two preset buttons. Preset buttons Display Control knob �...
General Display The display presents the wash programs, options and additional functions. The up and down arrows on the right-hand side of the display indicate that there are more options available in the current menu. Turn the knob for next NORMAL 60 program.
General Wash program The machine is programmed with a number of programs adapted to the range of uses to which the machine is intended. NORMAL The following wash programs can be available: 6277 Wash program Normal. Cotton. Full load. Different temperatures can be selected. Wash program Synthetics.
General Start menu A start menu will appear on the display once a NORMAL 60 wash program has been selected. Here, you can 60° complement the selected wash program with up OPtiON 1 to two options (on certain machines), select how StARt the machine is to start and obtain information on the selected wash program.
General ”NO PREWASH” Prewash will be excluded from the selected SeLect OPtiON wash program. NO PReWASh ”LIGHT SOILED” The temperature is lowered 5 °C at all 6204 temperatures and the main wash shortened by 4 minutes. SeLect OPtiON ”QUICk WASH” The machine excludes the selected wash Light SOiLeD program’s prewash and shortens spin drying...
Page 12
General ”GENTLE EXTRACTION” Extraction in the selected wash program is ex- SeLect OPtiON cluded between rinses and the final extraction is shorter. geNtLe ”SHORT EXTRACTION” 6204 Final spin dry in selected wash program is shortened by 4 minutes. ”EXTRA EXTRACTION” SeLect OPtiON Final spin dry in selected wash program is ShORt...
General Program time Shows approximate wash time for selected NORMAL 60 60° program. Delayed start PROgR.tiMe, MiN In this menu, you can set a delay of up to 99 6204 hours and 59 minutes before the machine starts the selected wash program. The arrow in the menu indicates the column 60°...
General Washing functions Activated START NORMAL 60 60° option Turn the control knob to the START row. Press OPtiON 1 the knob to start the selected program. StARt On machines equipped with preset buttons, the preset wash program can be started with the 6204 respective button.
General Detergent supply Prewash, powder or liquid detergent, if option "Prewash" has been selected. Main wash. Two compartments, one for powder detergent and one for liquid. Alt. Fabric softener, liquid 6229...
General Remaining time During the wash, the remaining time for the selected wash program will be shown at the 60° NORMAL 60 bottom of the display. The time is given in minutes. MAiNWASh To calculate the remaining time, the machine uses tiMe Left 20 a model calculation based on earlier used wash programs.
Handling Starting with control knob • Select the desired wash program with the control knob and confirm by pressing the knob. • Add any options to the selected wash pro- gram. Select from the list with the control 6182 6179/6180 knob and confirm by pressing the knob. Note! Max two options can be chosen for each wash program...
Handling Starting with preset button • Empty any pockets. • Close the door. • Add the correct amount of detergent and sof- tener. Note! Alt. Refer to the dosages on the detergent packaging. Do not overdose. • Press the preset button for the desired pro- gram. • If the machine has a coin meter, insert the correct amount of coins/tokens.
Error messages Error messages A fault in the program or in the machine is indi- cated by an error message comprising an error code and a descriptive text. eRROR Resetting of error code and restart of washing program can be done by a quick press on the knob.
Maintenance Maintenance Daily • Clean the door seal from detergent residue. • Make sure the door is not leaking. • Clean the detergent supply box and wipe off the machine with a damp rag. • Make sure the drain valve is not leaking. •...
Page 23
A11 (2003) WN3..., N5... EN 61000-3-11 (2001) EXSM.X. EN 61000-6-2 (2005) WN3..., N4..., N5... EN 61000-6-3 (2007) N4... Försäkran om överensstämmelse EF-samsvarserklæring Electrolux Laundry Systems Sweden AB Electrolux Laundry Systems Sweden AB SE-341 80 Ljungby, Sverige SE-341 80 Ljungby, Sverige, försäkrar under eget ansvar att denna produkt, med typbeteckning och enl. ovan, är tillverkad i erklærer på eget ansvar at dette produktet, med typebetegnelse og produksjonsnummer som överensstämmelse med följande direktiv: angitt nedenfor, er produsert i samsvar med bestemmelsene i følgende direktiver:...
Page 24
Translation table for model name to type of approval Commercial name Type W455H W.55H. W465H W3... W475H W3... W4105H W3... W4130H W3... W4180H W3... W4240H W3... W4300H W3... FOM71 CLS W3... WB4130H W3... WB4180H W3... W3... W475S W3... W485S W3...
Page 25
Skrotning av maskin När maskinen inte längre skall användas måste den lämnas till en återvinningsstation för destruktion. Många detaljer i maskinen går att återanvända, men den innehåller även annat material som måste tas om hand på ett korrekt sätt. Lämna därför aldrig maskinen eller delar av maskinen i hushållsavfallet, eftersom det kan leda till hälsorisker eller skador på...
Page 28
Electrolux Laundry Systems Sweden AB 341 80 Ljungby, Sweden www.electrolux.com/laundrysystems Share more of our thinking at www.electrolux.com...