To Replace The Cpu Board - Electrolux W4400H Service Manual

142
To replace the CPU board
If the CPU board is faulty and has to be replaced, the correct software for
the particular washer extractor will have to be downloaded onto the new
CPU board.
For this you need:
1. A new CPU circuit board.
2. A portable PC with Windows 98, NT, ME or 2000.
. The correct cable for connecting the PC to the CPU board.
4. Software which is correct for the model of washer extractor the CPU
board is to be installed in, to be downloaded onto that CPU board.
These program files can be ordered from the supplier.
5. A special program called CMM G000 (Certus Maintenance Manager),
used for converting and dowloading the files onto the new CPU board.
This program can also be ordered from the supplier.
Instructions:
1. Order the right software for your CPU board from the supplier. You must
state the type and serial number of the machine to obtain the correct
version of the program. If you do not have it already, you should order
the program CMM G000 (Certus Maintenance Manager) at the same
time. The programs can be supplied on diskette or via E-mail.
2. Install and open the CMM G000.
. In main menu click "Downloading software".
4. Click on "Browse" and select your file. Mark the file, then "open".
5. "Ready to download", click "proceed".
Programme unit