Table of Contents
Advertisement
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 90°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG OF WHITE COTTON AT 90°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
carry out the prewash phase,
pour it into the compartment marked
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
P1194
and, if you wish to
.
P1195
3. Switch the machine on
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to Off.
Off
Cottons
Cottons Economy
Synthetics
Delicate Spin
Delicates
Spin
Handwash
Drain
Wool
Rinse
Silk
Minipr. 30
Switching the machine on for
the first time
LANGUAGE
When switching on the appliance for the first time you
must set the language in which you want the indicators
in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In such
case, go to the chapter «Change language» if you would
like to change the language setting.
Example:
1. Press the Change button until the desired language
appears in the display.
Language
ENGLISH
Temp.
Spin
Options
Change
13
Sprache
DEUTCH
Exit
Temp.
Spin
Options
Change
A
Exit
Advertisement
Table of Contents
