Electrolux W4400H Service Manual page 102

102
ADJUST SPIN SPEED ALLOWED.
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL -DOWN 70 °C
Y/N
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME
Y/N
Programme unit
Y
Y
Y
Y
N
Y
Y
N
175
0
15
150
175
Answer Yes (Y) or No (N).
Press .
Y
Y
Y
N
Y
Y
N
175
0
15
150
175
0:12
Answer Yes (Y) or No (N).
Press .
Temperature in °C
Here you determine if all temperatures are to be
shown in °C or °F.
If you answer Yes (Y):
All temperatures will be shown in °C.
If you answer No (N):
All temperatures will be shown in °F.
Repeat program mode question
Here you determine whether you (or the user) will be
given the chance to select either Standard or Ad-
vanced mode for each new program module you are
programming, if you start programming in Standard
mode.
If you answer Yes (Y):
You can select either Standard or Advanced
mode for each new program module you pro-
gram.
If you answer No (N):
All modules must be programmed using either
Standard mode or Advanced mode consistently,
whichever is selected when you begin program-
ming.