EAN/JAN 8 Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
* On
EAN/JAN 8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN 8 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/JAN 8
barcodes that have addenda. Default = Not Required.
Required
6 - 22
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
3200 User's Guide