Please refer to Honeywell website (www.honeywellaidc.com) for complete
keyboard country support information and applicable interfaces. If you need to
program a keyboard for a country other than one listed above, scan the Program
Keyboard Country barcode below, then scan the numeric barcode(s) for the
appropriate country from the inside back cover, then the Save barcode.
This programs keyboard styles, such as Caps Lock and Shift Lock. Default =
Regular is used when you normally have the Caps Lock key off.
Caps Lock is used when you normally have the Caps Lock key on.
Autocaps via NumLock barcode should be scanned in countries (e.g.,
Germany, France) where the Caps Lock key cannot be used to toggle Caps
Lock. The NumLock option works similarly to the regular Auotcaps, but uses the
NumLock key to retrieve the current state of the Caps Lock.
Emulate External Keyboard should be scanned if you do not have an external
keyboard (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard barcode, you must power
cycle your computer.
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
2 - 4
Program Keyboard Country
Autocaps via NumLock
Emulate External Keyboard
3200 User's Guide