Data Format Editor - Honeywell 3200 User Manual

Move Commands
F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved ahead.)
F7 Move the cursor to the beginning of the data string. Syntax = F7.
Miscellaneous Commands
FE Compare character in current cursor position to the character "xx." If char-
acters are equal, increment cursor. If characters are not equal, no format
match. Syntax = FExx (xx stands for the hex value for an ASCII code, see
ASCII Conversion Chart (Code Page 1252)

Data Format Editor

Enter Data Format
Clear One Data Format
Save
3200 User's Guide
on page A-2.)
* Default Data Format
Clear All Data Formats
Discard
5 - 3