Codabar; Codabar Start/Stop Characters; Codabar Check Character - Honeywell 3200 User Manual

EXAMPLE: Decode only those barcodes with a count of 9-20 characters.
Min. length = 09
EXAMPLE: Decode only those barcodes with a count of 15 characters.
Min. length = 15
For a value other than the minimum and maximum message length defaults,
scan the barcodes included in the explanation of the symbology, then scan the
digit value of the message length and Save barcodes on the
inside the back cover of this manual. The minimum and maximum lengths and
the defaults are included with the respective symbologies.

Codabar

Codabar
* On

Codabar Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.
Default = Don't Transmit .
Transmit

Codabar Check Character

Codabar check characters are created using different "modulos." You can
program the imager to read only Codabar barcodes with Modulo 16 check
characters. Default = No Check Character.
6 - 2
Max. length = 20
Max. length = 15
<Default All Codabar Settings>
Programming Chart
Off
* Don't Transmit
3200 User's Guide