Intercharacter Delay; Interfunction Delay - Honeywell 3200 User Manual

Intercharacter Delay

An intercharacter delay of up to 495 milliseconds may be placed between the
transmission of each character of scanned data. Scan the Intercharacter Delay
barcode below, then scan the number of milliseconds and the SAVE barcode
using the Programming Chart
To remove this delay, scan the Intercharacter Delay barcode, then set the
number of steps to 0. Scan the SAVE barcode using the
inside the back cover of this manual.
Note: Intercharacter delays are not supported in USB serial emulation.

Interfunction Delay

An interfunction delay of up to 495 milliseconds may be placed between the
transmission of each segment of the message string. Scan the Interfunction
Delay barcode below, then scan the number of milliseconds and the SAVE
barcode using the
To remove this delay, scan the Interfunction Delay barcode, then set the
number of steps to 0. Scan the SAVE barcode using the
inside the back cover of this manual.
3200 User's Guide
inside the back cover of this manual.
Prefix Scanned Data
1
Intercharacter Delay
Intercharacter Delay
Programming Chart
Prefix Scanned Data
STX 1 HT
Interfunction Delays
Interfunction Delay
Suffix
2 3 4 5
inside the back cover of this manual.
Suffix
2 3 4 5 CR
Programming Chart
LF
Programming Chart
4 - 5