Repairs and/or upgrades are not to be performed on this product. These
services are to be performed only by an authorized service center. Please see
on page 12-1 for further information.
The 3200 linear imager provides reliable and efficient operation with a minimum
of care. Although specific maintenance is not required, the following periodic
checks ensure dependable scanner operation:
Cleaning the Device
Reading performance may degrade if the scanner's window is not clean. If the
window is visibly dirty, or if the scanner isn't operating well, clean the window
with a soft cloth or lens tissue dampened with water (or a mild soapy water
solution). If a soapy water solution is used, rinse with a clean lens tissue
dampened with water only.
The scanner's housing may also be cleaned the same way.
Do not submerge the imager in water. Do not use
abrasive wipes or tissues on the imager's window –
abrasive wipes may scratch the window.
Never use solvents (e.g., acetone, benzene, ether, or
phenol-based agents) on the housing or window –
solvents may damage the finish or the window.
Inspecting Cords and Connectors
Inspect the scanner's interface cable and connector for wear or other signs of
damage. A badly worn cable or damaged connector may interfere with scanner
operation. Contact your Honeywell distributor for information about cable
replacement. Cable replacement instructions are on
3200 User's Guide
11 - 1