Norac UC4+ End-User Installation Manual
Spray height controller .
rau oem
Hide thumbs
Also See for UC4+:
- Operator's manual (60 pages) ,
- Installation manual (50 pages) ,
- Manual (31 pages)
Subscribe to Our Youtube Channel
Related Manuals for Norac UC4+
Summary of Contents for Norac UC4+
- Page 1 Spray Height Controller RAU OEM End-User Installation Manual Improving the competitiveness of Industry and Agriculture through Precision Measurement...
- Page 2 NOTICE NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained in this manual. The technical information in...
- Page 3 INTRODUCTION Congratulations on your purchase of the NORAC UC4+ Spray Height Controller. This system is manufactured with top quality components and is engineered using the latest technology to provide operating features and reliability unmatched for years to come. When properly used the system can provide protection from sprayer boom damage, improve sprayer efficiency, and ensure chemicals are applied correctly.
- Page 4 CONTROL PANEL MOUNTING Install the UC4+ control panel (E01) in the cab of the sprayer with the supplied mounting bracket. The location must facilitate connecting the power cable (C10) to the bottom of the UC4+ Control Panel. Using the adjustable RAM mount on the control panel (E01), mount panel as shown in Figure 1. Figure 1 –...
- Page 5 CABLE INSTALLATION POWER CONNECTION HITCH CONNECTION Figure 2 – Cable Routing Overview 1. Connect C10 to the UC4 control panel in the sprayer cab. Ensure that both plugs (P16A and P4) are connected to the panel. 2. Route the receptacle end (R16) of C10 to the exterior of the cab and connect to C11 at the hitch. Ensure cable is routed in a safe manner to avoid damage.
- Page 6 COMPLETING THE INSTALLATION 1. Turn on the power for the UC4+ Control Panel using the switch on the side of its chassis. Ensure that the display lights up to confirm that the panel has proper +12 volt power. 2. After a moment the panel will display the main operational screen: ↓M M↓...
- Page 7 Notes:...
- Page 8 Canada NORAC Systems International Inc. CALL TOLL FREE: 1-800-667-3921 (306)664-6711 SHIPPING ADDRESS: 3702 Kinnear Place Saskatoon, SK S7P 0A6 United States Norac, Inc. CALL TOLL FREE: 1-866-306-6722 (763)786-3080 SHIPPING ADDRESS: 1290 Osborne Rd NE, Suite F Fridley, MN 55432-2892...
Need help?
Do you have a question about the UC4+ and is the answer not in the manual?
Questions and answers