Table of Contents
Advertisement
BATTERY MAINTENANCE
Main Battery
The high-quality Lithium-Ion battery provided with your unit may be re-charged over 500 times according to
the battery manufacturer .
Note: If the battery's duration does not last the normal time-frame specified, it may be time to change it . The
main battery should last from 12 to 24 months if used under normal working conditions .
Backup Battery
The Backup Battery will normally not need to be replaced during the expected life of the CE8000B unit .
Re-charge as specified after use .
Replacing the Battery
Note: Always turn the unit off before removing the battery . The CE8000B unit uses an approved battery to
ensure a quicker charging time, longer battery life and resistance to shock and vibrations . To ensure that
the batteries are appropriate for use on DAP Technologies equipment, it is strongly recommended that
these be purchased directly through DAP Technologies or one of its distributors . (Check for the DAP or
DAP Technologies logo on the battery) .
1 . Turn off the CE8000B Unit . (Refer to "Turning
the Unit Off Manually" Section for further
instructions) .
2 . Turn Battery Compartment Screw counter-
clockwise to unlock .
3 . Remove the battery .
4 . Replace the battery ensuring to insert top end
of the battery first and towards top of the unit .
CAUTION
•
Personal injuries may result if batteries are not
handled with care .
WArNING
•
If battery becomes unusable, dispose of it
immediately .
•
Keep the battery away from heat sources,
including open fires and direct sunlight .
•
Never disassemble the battery .
•
Do not place the battery on metal objects as
this could short circuit the power contact pins .
Note: The type of main battery used in the CE8000
series is not considered hazardous waste . Refer to
your local regulations on how to dispose of battery
appropriately .
50
Storage & Maintenance
CMU055-A2a
www.daptech.com
Advertisement
Table of Contents
