From The External Battery Charger - DAP Technologies CE8640B User Manual

CHARGING THE BATTERY (CONTINUED)
From the Communication Cradle (Continued)
Note: The CE8000B Battery Status indicator will turn
red in the next 5 seconds indicating that charging
is now in progress . The light will turn green when
charging is complete . Charging may take up to 5
hours .
Note: If the unit was turned off, it should turn back
on after a few seconds or after 2 to 3 minutes if
the main battery charge has been very low for
some time . Processing will resume exactly where it
was interrupted once re-charging starts . For more
information on the installation and use of the cradle,
refer to the CBCE840 User Guide .

From the External Battery Charger

1 . You may also use the External Battery
Charger to charge the battery . Remove
the main battery from the CE8000B unit .
2 . Insert battery into charger .
3 . Power up the charger using the appropriate AC/
DC adapter . The charge indicator (LED) will be
red indicating that the battery is charging . The
LED will turn green after approximately 5 hours
indicating a full charge .
www.daptech.com
Getting Started
Battery Status indicator on CE8640B
Battery Status indicator on CE8800B
CMU055-A2a 19