Table of Contents
Advertisement
BARCODE READERS (CONTINUED)
2D Barcode Reader
This special option is usually installed and configured in-house at the manufacturer's .
The 2D Barcode Reader is primarily controlled by the client application and a special driver . Therefore, please
refer to your application specialist or supervisor for further instructions .
Note: You may also refer to the CE8000B Technical Guide located on DOCUDAP for further instructions on
programming .
Testing the 2D Barcode Reader
1 . To test the reader, click on:
a) Start
b) Program
c) DAP Utilities
d) CE Pad
2 . Hold the unit steadily at a distance of 10 cm (4
in), from the barcode
3 . To activate reader, press the F3 Key .
WArNING
Do not move the unit while reading or unit will not
be able to read barcode .
Note: Unlike the laser scanner, the 2D reader does not "swipe" the barcode, but rather, it takes a reading
much like a "photograph" which is then recognized and interpreted by the unit . Reading a barcode can be
taken from any angle .
The 2D Barcode Reader will emit a red beam allowing the user to adequately focus on the barcode needing
to be read .
Once the reading has been completed, the device will emit a sound . The numeric code will then be displayed
on the screen .
You can release the trigger at any time to cancel the reading .
www.daptech.com
CE8000B Options
CMU055-A2a
39
Advertisement
Table of Contents
