Removing Pc Cards - DAP Technologies CE8640B User Manual

USING PC CARDS (CONTINUED)

Removing PC Cards

WArNING
The Application may not allow the removal of a PC Card while it is running . Refer to your
Supervisor, the application provider or a DAP Technologies Representative for further instructions .
1 . Turn the unit off .
2 . Using a Flathead Screwdriver remove the four
screws located on either side of the PC Card
Expansion Bay .
3 . Remove Expansion Bay .
4 . Press the 'release button' located to the right
of the PC Card opening .
5 . Remove PC Card .
6 . Replace Expansion Bay and tighten screws .
WArNING
• Remove PC Card in a clean and dry
environment to ensure no dust particles or
water enters the unit .
www.daptech.com
Operation Guide
CMU055-A2a 29