Table of Contents
Advertisement
BARCODE READERS
Laser Scanner
The 'Laser Scanner' function will depend on the
application used and a special software driver .
Refer to your application's User Guide for further
instructions .
Information
scanning instructions .
Refer to the diagram to the right for right and wrong
scanning methods .
Testing the Laser Scanner
1 . To test the Laser Scanner, click on:
a) Start
b) Program
c) DAP Utilities
d) CE Pad
2 . To activate scanner, point the top
unit toward the barcode label needed to be
scanned .
3 . Press the 'SCAN' Key
the
unit
back
beam
completely
4 . Once the label has been decoded, the unit will
sound a short 'beep' .
Note: If you keep the Scan key pressed for too
long, the unit will stop scanning by itself after a
few moments . The unit will sound two (2) beeps to
indicate that no barcode has been detected .
Advanced Users: Refer to the CE8000B Technical
Guide for further instructions on programming .
CAUTION
•
Avoid Exposure to Laser Light Beam .
•
Do not intentionally look into the Laser Light
Beam .
38
CE8000B Options
included
are
basic
(a)
of the
(b)
and move
and
forth
so
the
crosses
the
label .
CMU055-A2a
right
Wrong
a
b
www.daptech.com
Advertisement
Table of Contents
