Table of Contents
Advertisement
TURNING THE UNIT ON & OFF (CONTINUED)
Turn Off the CE8800B Unit
1 . Click on the SYS key .
2 . Click on Suspend .
Automatic Shut-Off
If the unit remains inactive for more than 3 minutes, it will turn off automatically in order to save battery . The
unit will also save the exact status of your application program and data before shutting sown . Simply restart
the unit when ready to resume your task where you left off .
Note: When turned off with fully charged batteries, the unit can be stored up to several days without re-
charging . Refer to 'Storage & Maintenance' Section for further instructions .
TOUCH SCREEN
Touch Screen Calibration
1 . Hold your Stylus down until the Cross begins
to move .
2 . Touch the center of the Cross for a few
seconds . Repeat operation as Cross moves to
another location .
To access Touch Screen Calibration
Menu on the CE8640:
1 . Click on:
a) Start
b) Settings
c) Control Panel
2 . Select Stylus Applet
3 . Click on Calibration Tab and click on
Recalibrate .
22
Operation Guide
CMU055-A2a
Carefully press and briefly hold stylus
on the center of the target . Repeat as
the target moves around the screen .
Press the Esc key to cancel
+
www.daptech.com
Advertisement
Table of Contents
