Workflow For Initial Settings - Ricoh SP C360DNW Operating Instructions Manual

2. Configuring the Initial Settings of the Printer

Workflow for Initial Settings

When turning on the printer for the first time, you can configure the settings required for the operation of
the printer using the wizard.
The configuration flow is as follows:
1. Select the display language.
2. Configure the printer settings under the Installation Settings.
3. Print a test page.
Procedure
Specify the display language setting of the control
panel.
1
Displayed only when the printer is turned on for
the first time.
Configure the date, time, network and other
settings on the printer. The categories that can be
configured are as follows:
2
Print a configuration page and check that the
3
settings are correct.
10
Description
• Time Zone
• Date and Time
• Daylight Saving Time
• Network
Reference
page 11 "Selecting the Display
Language"
page 12 "Configuring the
Printer Settings Using Installation
Settings"
page 18 "Test Printing"