Table of Contents
Advertisement
User Tools
4 Initial Settings
No.
Mode
1
Master Making
Density
2
Original Type
3
Ratio
5
4
Economy Mode
5
Erase Border
Width
6
Program/
Change Class
7
Program/
Change Memory
8
Prog.Change:
Class/Year
106
Description
You can specify the image density that is selected by default
when the power is turned on.
Note
❒ Default: Normal
You can specify the original type that is selected by default when
the power is turned on.
Note
❒ Default: Text
You can specify the reproduction ratio that is selected by default
when the power is turned on.
Note
❒ Default: 100% (Full Size)
You can select to have Economy mode as either "On" or "Off"
when the power is turned on, or after mode settings have been
cleared.
Note
❒ Default: Off
You can specify the edge erase margin.
Note
❒ Default: 5 mm, 0.2"
To store settings of the Class mode, see p.51 "Storing Class Mode
Settings".
To store settings of the Memory mode, see p.49 "Storing Normal
Memory Mode Settings" and .p.50 "Storing Stack Memory Mode
Settings"
To store settings of the Select Class/Year, see p.53 "Registering
Class/Year".
Advertisement
Table of Contents
