Ricoh SP C360DNW Operating Instructions Manual page 15

4. Configure the daylight saving time.
1. Press [OK] while the [Daylight Saving Time] menu is highlighted
Specify whether or not to set the daylight saving time.
2. Select [Active] or [Inactive]
When you select [Inactive], continue to the next step.
When you select [Active], configure the following items:
• Start Time
Specify the month, week, day of the week, and time the daylight saving time starts.
• End Time
Specify the month, week, day of the week, and time the daylight saving time ends.
• Offset
Specify the time difference from the standard time.
3. Press [Exit]
5. Configure the network settings if necessary.
The network settings workflow varies depending on whether to use a wireless LAN or wired LAN.
• Connect to a wireless network
For details, see page 14 "Connecting the Printer to a Wireless Network".
• Connect to a wired network
For details, see page 15 "Connecting the Printer to a Wired Network".
6. If you do not configuring the network settings, exit Installation Settings, and then restart
the printer.
1. Press [Exit]
2. Press [Restart]
Configuring the Printer Settings Using Installation Settings
Press [OK]
Press [OK]
13