Operation - Makita GF600 Instruction Manual

1.
Insert the short nail adapter into the slit in the rear of the

OPERATION

WARNING:
Do not touch around the exhaust vent.
surface will be very hot during or after an oper-
CAUTION:
order before operation.
the workpiece.
bustion chamber and mixed with air by the fan.
1
2
2. Bolt
1
1.
the trigger.
Fuel gas is combusted and the nail is driven.
3. Further driving can be initiated only after both the
contact element and the trigger are released.
nail.
rest of nails get to the last 9-11 pieces.
Jammed nailer
WARNING:
CAUTION:
to do so causes poor nail feeding.
Follow the removing nail procedure and remove the
nails in the magazine.
1
2
-
1. Latch 2. Door
10 ENGLISH