Makita GF600 Instruction Manual page 4

25.
nated battery packs. Use of any other battery
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
liquid contacts eyes, additionally seek medical
help.
irritation or burns.
Service
repair person using only identical replacement
parts.
tool is maintained.
29. Follow instruction for lubricating and chang-
ing accessories.
30. Keep handles dry, clean and free from oil and
grease.
Cordless nailer/stapler safety
warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
Save all warnings and instruc-
tions for future reference.
For personal safety and proper operation and mainte-
using the tool.
General safety
implement.
Personal protective equipments
ment by the tool operators and by other persons in
the immediate working area.
For Australia and New Zealand only
safety glasses and the face shield should conform
-
Safety glasses
-
Face shield
be buttoned or rolled up. No necktie should be
worn.
Work area safety
spaces. Otherwise carbon monoxide may cause
dark areas invite accidents.
gases or dust. Operating the tool can create
sparks which may ignite the dust or fumes.
ating the tool. Distractions can cause you to lose
control.
which must be complied with by keeping noise
shutters should be used to contain noise.
Safety devices
the trigger is pulled or if only the contact arm is
pressed against the wood. It must work only when
operation with fasteners unloaded and the pusher
-
in fully pulled position.
position is also very dangerous. Never attempt
to fasten the trigger. Do not operate a tool if any
-
depressed with tape or wire. Death or serious
manual. fasteners may be driven accidentally if
the safety mechanism is not working correctly.
Loading fasteners
of the operating controls is activated.
use of any other fasteners may cause malfunction
of the tool.
4 ENGLISH
-