Functional Description; Installing Or Removing Battery Cartridge - Makita GF600 Instruction Manual

(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
Be careful not to drop or strike battery.
9. Do not use a damaged battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2. Never recharge a fully charged battery car-
tridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tem-
perature at 10°C - 40°C (50°F - 104°F). Let a hot
battery cartridge cool down before charging it.
Overview of the nailer
4
1
1 0
1. Battery cartridge 2. Fuel cover 3.
4. Indication lamp 5.
lever 7. Magazine 8. Contact element 9. Lamp
10.
2
9
6
8
7
6.
FUNCTIONAL
DESCRIPTION
CAUTION:
checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
removing of the battery cartridge.
when installing or removing battery car-
tridge. Failure to hold the tool and the battery
hands and result in damage to the tool and
ment opening and slip it into place. Insert it all the way
3
until it locks in place with a little click.
5
1. Button
tool while pressing the buttons on the side of the car-
6 ENGLISH
-
1