Indication Lamp; Adjusting The Nailing Depth - Makita GF600 Instruction Manual

ing valve toward the adaptor.
properly.
down to latch.

Adjusting the nailing depth

CAUTION:
1.
B
A
-

Indication lamp

Color of the indication lamp means the followings.
Blinking green: Normal status
Blinking red: Need to recharge the battery cartridge
Lighting-up-red: Recharge the battery cartridge.
Nailing cannot be performed due to no remaining bat-
tery capacity.
Blinking orange:
Blinking orange after blinking green and red alter-
nately: Fault detection is running. Remove and reinsert
the battery cartridge to reset. If fault detection is running
service center to repair it.
Installing the hook
1
1. Hook
tool. You can install it on either side of the tool. It can be
removed without using any tool.
upper part of the hook in both directions and pull the
hook from the tool.
1
ASSEMBLY
CAUTION:
tridge before carrying out any work on the tool.
8 ENGLISH
-
-