Related Manuals for Makita GF600SE
Summary of Contents for Makita GF600SE
- Page 1 INSTRUCTION MANUAL Cordless Brad Nailer GF600 012803 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model GF600 Nail length Nail Gauge 16Ga :15 mm - 65 mm Nail capacity 100 nails (2strip) Dimensions (L X H X W) 266 mm X 90 mm X 304 mm Net weight 2.2 kg Rated voltage D.C. -
Page 3: General Power Tool Safety Warnings
Electrical safety Makita Corporation responsible Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Brad Nailer reduce risk of electric shock. - Page 4 13. Remove any adjusting key or wrench before when used with another battery pack. turning the power tool on. A wrench or a key left 25. Use power tools only with specifically attached to a rotating part of the power tool may designated battery packs.
- Page 5 Safety glasses of the tool. Power source Face shield Use the tool only with the Makita genuine fuel cell. • Do not touch liquid gas sprayed out of the fuel cell. • Contact with it may cause injury.
- Page 6 Wipe off all dust from Be careful not to drop or strike battery. the parts. Do not use a damaged battery. Ask Makita authorized service center for periodical • SAVE THESE INSTRUCTIONS. inspection of the tool. To maintain product SAFETY and RELIABILITY, •...
-
Page 7: Functional Description
charging it. Overview of the nailer 012805 To install the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Insert it all the way until it locks in place with a little click. -
Page 8: Adjusting The Nailing Depth
Fuel cell 1. Jet nozzle Attaching the metering valve to the fuel cell 1. Metering valve 2. Cap 012809 Insert the fuel cell directing the jet nozzle of the metering valve toward the adaptor. 012807 Detach the cap (in case the metering valve is provided with the cap). -
Page 9: Indication Lamp
Then release the running again, it is malfunction condition. Ask your local pusher button, and return the pusher lever to the end of Makita service center to repair it. the strip gently. Installing the hook Removing nails 1. -
Page 10: Operation
1. Nose adapter 012817 012894 To drive a nail, place the contact element against Short nail adapter the workpiece. The fan motor is activated, fuel gas is injected into 1. Short nail combustion chamber and mixed with air by the fan. adapter 1. -
Page 11: Maintenance
If you need any assistance for more details regarding Dispose of all empty cells where they will not be • these accessories, ask your local Makita Service Center. found by children, crushed, punctured or burned. Nails When you get home: •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885078-228...