Parameters; Diagnostics - Vacon 100X series Applications Manual

vacon • 39
4.3.3

Parameters

Through this submenu, you can reach the application parameter groups and parameters. More
information on parameters in chapter 6.
4.3.4

Diagnostics

Under this menu, you can find
info.
4.3.4.1 Active faults
Menu
Active faults
4.3.4.2 Reset faults
Menu
Reset faults
4.3.4.3 Fault history
Menu
Fault history
4
Active faults Reset faults
,
Table 9.
Function
When a fault/faults appear(s), the
display with the name of the fault
starts to blink. Press OK to return
to the Diagnostics menu. The
Active faults
submenu shows the
number of faults. Select the fault
and push OK to see the fault-time
data.
Table 10.
Function
In this menu you can reset faults.
For closer instructions, see chap-
ter 7.
Table 11.
Function
40 latest faults are stored in the
Fault history.
User Interfaces
Fault history Counters
, ,
Note
The fault remains active until it is
cleared with the Reset button (push
for 2 s) or with a reset signal from the
I/O terminal or fieldbus or by choos-
Reset faults
ing (see below).
The memory of active faults can
store the maximum of 10 faults in
the order of appearance.
Note
Remove external Control
CAUTION!
signal before resetting the fault to
prevent unintentional restart of the
drive.
Note
Entering the Fault history and click-
ing OK on the selected fault shows
the fault time data (details).
Software
and