3: Using Configuration Menu; Software Installation; Using Rrcp - Surecom 824DXFS2B User Manual

3. Using Configuration Menu
The Remote Control Protocol (RRCP)
functionalities of this Layer 2 switches by software. The
Window-based software package that implements
The RRCP Management Application gives network administrators the ability to configure and
monitor switches like intelligent switches.
Before you getting started, make sure that you meet the following requirements.
1. A computer with an Ethernet network card installed and
2. This CD-ROM with RRCP
3. Your Windows CD, if your computer is running
or ME
4. UTP network cable with

3.1 Software Installation

WinPcap 3.0 Installation
1. Insert the attached
2 .Select the "WinPcap 3.0"
installation.
RRCP Installation
1.On the main screen, select
installation.
2.After installation, there will be a

3.2 Using RRCP

1. Double click the RRCP's icon or select the
2. Select the Network adapter which is connecting to switch. Then click
program
RJ-45 connector
CD-ROM with this switch into
and click "Install". Then follow the install wizard to finish
"RRCP" and click
"RRCP Icon"
is a simple control protocol proposed to enhance the
RRCP
RRCP functions at the management host side.
CD-ROM
Windows 98,XP,2000,NT4.0,Service Pack 6
PC's CD-ROM drive.
"Install". Then follow the install wizard to finish
on the desktop.
"RMT" in the start program menu.
14
Management Application, is a
Drive
"OK".