Related Manuals for Surecom EP-804CG-S
Summary of Contents for Surecom EP-804CG-S
- Page 1 EP-804/805/808/CG-S 4/5/8 Port 10/100/1000M Gigabit Ethernet Desktop Smart Switch User’s Manual "% & "&/5 ...
- Page 2 Table of Contents FCC Statement CE Declaration of Conformity Trademarks...
- Page 3 1. Introduction Performance Highlights Key Features Package Contents...
-
Page 4: Led Indicators
LED Indicators 2. Hardware EP-804CG-S Front Panel EP-804CG-S EP-804CG-S Link/Act FDX/Col Power 1000 EP-805CG-S EP-805CG-S/808CG-S EP-808CG-S EP-808CG-S Note: 1.In the case of Link, the lights of 100 and 1000 don't light up, it belongs to 10Mbps. 2.On 805CG-S/808CG-S LED, when Tx lights on (not flash), it means that the switch Power is transmitting data to linked computer. -
Page 5: Network Connection
Network Connection CHAPTER 3 Network DIY Switch to Hub PC to Switch DC 7.5V Note: The LED indicators for PC connection are dependant on the LAN card capabilities. If LED indicators are not illuminated after making a proper connection, check the PC LAN card, the cable, the 4/ 5/8 port 10/100/1000M Gigabit Ethernet Desktop Smart Switch... -
Page 6: Technical Specification
3. Technical Specification EP-804/805/808CG-S... - Page 7 1-Year Warranty 1-Year Warranty 1-Year Warranty 1-Year Warranty 1-Year Warranty The manufacturer warrants to the original consumer /purchaser free from defects in materials or workmanship for limited time from the original factory shipment date. Model: Serial: Date Purchased: Where Purchased: From Whom: MANUFACTURER DISTRIBUTOR...
-
Page 8: Software Specification
4. Software Specification Configuring Smart Management Functions... - Page 9 RS-232 Cable host PC Using Windows HyperTerminal for Smart Configuration of VLAN, Priority ,and Port- Mirroring HyperTerminal...
- Page 11 Hot Keys Port Configurations Port Status Main Menu...
- Page 12 Port Mirror Configurations Port Mirror function allow users to choose a port that can receive the traffic of another port or of all ports. This function is important for users to diagnose network problem. The “monitor port” is the port to set to be viewed by the snooping port. The “snooping port”...
-
Page 13: Vlan Configurations
VLAN Configurations... -
Page 14: Create A Vlan Group
Create a VLAN Group... - Page 15 Remove a port to a VLAN Group Overlapping VLANs Separate VLAN groups Miscellaneous Configurations...
-
Page 16: Aging Time
Aging Time: Reset the Device to Default Setting All previous setting will be lost when use this function. If you accidentally press the <Control-D> key, but do not wish to change the setting. Please do not save settings when exit. Trunk Configuration:...
Need help?
Do you have a question about the EP-804CG-S and is the answer not in the manual?
Questions and answers