Surecom 824DXFS2B User Manual page 13

Connecting to Switch or Hub
You can also connect any
port of another switch via
When a attached 10BASE-T/100BASE-TX Hub is powered on or reset:
(10BASE-T Hub)
The Link/Act LED
The FDX/Col LED
The 100 LED will be unlighted
(100BASE-TX Hub)
The Link/Act LED
The FDX/Col LED
The 100 will light
When a Switch or other devices is switched on:
The Link/Act LED
The FDX/Col LED
The 100 LED will light for 100Mbps connection, otherwise it will be unlighted.
RJ-45 station port on the Switch to the Uplink port of a Hub or any
straight cable
will light
will be unlighted
will light
will be unlighted
will light
depends on the attached Switch or other devices' capabilities.
with RJ-45 plugs at both ends.
J 5 Cab e
24 22 23 21 17 11 12 5 9 1 0
13