Dmx Configuration; Autoshow; Focus Adjustment; Motor Settings - ProLights PIXIEWASH User Manual

3.8 DMX CONFIGURATION

The PIXIEWASH has 2 DMX channels configurations selectable through the control panel.
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the DMX Functions item. Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the DMX Channels item. Then press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the desired configuration 13CH - 16CH. ; Then press the button
ENTER to save.
• Press repeatedly the button LEFT to return the menu mode.
The tables on page 13 indicate the operating mode and DMX value. The PIXIEWASH is equipped with
5-pole XLR connections.

3.9 AUTOSHOW

To enter in the automatic mode and allow to the unit to carry out its show program independently follow
the instructions below:
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the Show setup item. Press the button ENTER.
• Press the buttons UP/DOWN to select the Show Mode item. Then press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the desired program LedShow1 - LedShow2 - LedShow3 - LedShow4;
Then press the button ENTER to save.
• Press repeatedly the button LEFT to return the menu mode.

3.10 FOCUS ADJUSTMENT

To set the focus regulation follow the instructions below:
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the Show setup item. Press the button ENTER.
• Press the buttons UP/DOWN to select the Focus adjust item. Then press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the desired values (000-255); Then press the button ENTER to save.
• Press repeatedly the button LEFT to return the menu mode.

3.11 MOTOR SETTINGS

To change the unit parameters follow the instructions below:
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the Motor Setup item. Press the button ENTER.
• Press the buttons UP/DOWN to select the desired option item and press the button ENTER to confirm:
- Pan Inverse - Used for reversing Pan movement. Select Pan Inverse, press ENTER button to confirm,
present mode will blink on the display, use UP/DOWN button to select No (normal) or Yes (pan
inverse), press ENTER button to store.
- Tilt Inverse - Used for reversing tilt movement. Select Tilt Inverse, press ENTER button to confirm, present
mode will blink on the display, use UP/DOWN button to select No (normal) or Yes (tilt inverse), press
ENTER button to store.
• Motor Offset - Allows you to set an offset for the pan/tilt motor. After selecting Motor Setup function press
button ENTER to confirm. Use the buttons UP/DOWN to select Pan Offset - Tilt Offset - Zoom Offset
• Press repeatedly the button LEFT to return the menu mode.
PiXiEWASH
15