Ringer Tone; Ringer Tone - Panasonic KX-TG5200M Operating Instructions Manual

Programmable Settings

Ringer Tone

You can set the handset ringer to use one of 7 ringer patterns for outside calls.
"Tone 1" to "Tone 3" are bell ringer patterns. "Melody 1" to "Melody 4" are preset
melody patterns. The factory preset is "Tone 1".
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone
1 to 3). If you select a melody pattern, you will not be able to distinguish lines by
their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
line.
1
Press [MENU].
2
Press the soft key (
setting".
3
Scroll to "Ringer tone" by pressing [d] or
[B], then press the soft key (
4
Select the desired ringer tone by pressing
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 17).
• You can also select the ringer tone by pressing
[1] to [7].
5
Press the soft key (
18
Handset
) at "Ringer
SELECT
SELECT
), then press [OFF].
SAVE
Ringer setting

Ringer tone

).
Ringer tone
1:Tone 1