Radio Shack TRS-80 Service Manual page 23

5-Meg Hard Disk
Service Manual
steps
,
making sure you inserted
the
diskette properly
.
7.
At the bottom of the screen,
LDOS asks you for the
date.
Type today's date
in
the mm/dd/yy form and
press <ENTER>.
For example, for June
17,
1982, types
06/17/82 <ENTER>
8*
LDOS then displays the name and date of the
diskette
above the
logo. It
also displays the expanded date
below the
logo*
9.
The screen then shows this prompts
LDOS Ready
Since you
f
ve not yet
initialized your Hard Disk System,
your computer
is
now operating
as a
Floppy Disk System,
the only way
it
can operate until you initialize
it.
If
you have already initialized your Hard Disk System,
you can remove the START-UP diskette (created during
initialization)
.
You only need
it
to
start up or
reset.
To operate the system for floppy disk only, hold down the
<CLEAR> key and press the RESET button. (You
must keep the
<CLEAR> key down until LDOS Ready appears.)
Model
I
System Power-Down
1.
The LDOS Ready prompt should be the last line on your
screen.
If
not,
press <ENTER> or
exit your
program
so that it appears.
2.
Remove all floppy
diskettes from their drives.
3.
Turn off any peripheral equipment.
4.
Turn off
the
primary hard disk drive
by turning the
POWER KEY counterclockwise.
This also turns off all
existing secondary drives.
5.
Turn off the Expansion Interface.
6.
Turn off the CPU/Keyboard.
ii©
iFfeael
-
21 -