Supplied Components; System Requirements - Sharp PN-L705H Operation Manual

If any components are missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp (insertion type): 4
 Cable clamp: 3
 Power cord: 1
 Remote control unit battery
(R-03 ("AAA" size)): 2
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
nConnected equipment
Hardware
OS
nSupplied Software (Windows)
CPU
Video Output
Memory
Free space on hard drive
To use the touch panel, the touch panel and computer must be connected, and Touch pen Management Tool, and Pen Software
must be installed on the computer from the supplied CD-ROM.
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install the software, see the manual for each.
The USB port varies depending on the terminal connected to the computer.
DisplayPort 1 input terminal/HDMI 1 input terminal
D-sub input terminal/DisplayPort 2 input terminal/HDMI 2 input terminal/HDMI 3 input terminal
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
SHARP Display Connect setup program and Touch Viewer setup program can be downloaded using Information Display
Downloader.

Supplied Components

 CD-ROM (Utility Disk): 1
 SHARP Display Connect License: 1
 Setup Manual: 1
 Touch pen (for capacitive touch panel): 1
 Touch pen adapter: 1
 Pen tip for touch pen
(for capacitive touch panel): 2
 Touch pen battery (LR-03 ("AAA" size)): 1
 Tray: 1
 Speaker cover: 2
 USB cable: 1
 USB extension cable: 1

System Requirements

Must have a USB 2.0 compliant port.
CD-ROM drive required for software installation.
Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),
Windows 10 (32-bit or 64-bit version)
Mac OS X v10.11, macOS v10.12
(The touch panel and touch pen operate with the standard driver of OS.)
Google Chrome OS Version 39 or later
(The touch panel and touch pen operate with the standard driver of OS.)
Intel Core m3-7Y30 or faster
Intel Core i5-7Y57 or faster recommended
Must be capable of output at a vertical frequency of 60 Hz or higher
At least 4 GB
At least 200 MB (free space separately required for data storage)
 RS-232C conversion cable (3.5mm mini jack): 1
 Eraser (for capacitive touch panel): 1
 Camera mount: 1
 Camera screw (inch thread): 1
 Speaker cover attachment screws (M3)/
Camera mount screws (M3): 6
 Touch pen adapter screw (Step screw, M3): 1
 Vertical sticker (Logo): 1
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
USB 1 port (for touch panel)
USB 2 port (for touch panel)
9
E