Sharp PN-L862B Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Monitor
  5. PN-L862B
  6. Operation manual

Sharp PN-L862B Operation Manual

Hide thumbs Also See for PN-L862B:
Table of Contents

Advertisement

Quick Links

Download this manual
PN-L862B
PN-L752B
PN-L652B
LCD MONITOR
OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Sharp PN-L862B

Summary of Contents for Sharp PN-L862B

  • Page 1 PN-L862B PN-L752B PN-L652B LCD MONITOR OPERATION MANUAL...
  • Page 2 Batteries are collected at points of sale. Return is free of charge. If the equipment has been used for BUSINESS PURPOSES, please contact your SHARP dealer who will inform you about take-back. You might be charged for the costs arising from take-back. Small equipment (and small quantities) might be taken back by your local collection facility.

  • Page 3: Important Information

    IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within CAUTION a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRIC within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric...

  • Page 4: Dear Sharp Customer

    DEAR SHARP CUSTOMER Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 5 SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: •...

  • Page 6: Tips And Safety Instructions

    - Never rub or tap the monitor with hard objects. - Do not use the power cord with a power tap. - Please understand that SHARP CORPORATION bears no Adding an extension cord may lead to fire as a result of responsibility for errors made during use by the customer or overheating.

  • Page 7: Mounting Precautions

    • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling.

  • Page 8: Table Of Contents

    Using the remote control unit ........24 Computer connection ..........51 Overlay board (Mark) ..........27 Communication conditions .........51 Freeze ................28 Communication procedure .........51 RS-232C command table ...........53 Troubleshooting .............55 Specifications ...............57 Intellectual Property Rights and Other Matters ..62 Mounting Precautions (For SHARP dealers and service engineers) ....63...

  • Page 9: Supplied Components

     Power cord  Cover SHARP logo: 1  Remote control unit battery: 2 Place this sticker onto the SHARP logo to cover the logo.  Setup Manual: 1 * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

  • Page 10: Part Names

    • It is possible to use the terminals for separate purposes; for example, using the TOUCH PANEL2 terminal to connect a fixed computer and using the TOUCH PANEL1 terminal to connect a mobile computer. Caution • Consult your SHARP dealer for attachment/detachment of optional parts.
  • Page 11 Part Names nRemote control unit 1. Signal transmitter 2. Operation buttons (See page 24.)

  • Page 12: Connecting Peripheral Equipment

    Connecting Peripheral Equipment nFront view nRear view 10 8 1. HDMI1 input terminal (support HDMI CEC) Caution 2. HDMI2 input terminal • Be sure to turn off the main power switch and disconnect 3. HDMI3 input terminal the plug from the power outlet before connecting/ •...
  • Page 13 Connecting Peripheral Equipment n USB port for the APPLICATION mode 9. Audio output terminal • The output sound varies depending on the input mode. • Connect USB devices (memory device, keyboard, mouse) • The volume of the output sound can be fixed by setting that you want to use in “APPLICATION”...

  • Page 14: Connecting The Power Cord

    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. AC input Main power terminal...

  • Page 15: Preparing The Remote Control Unit

    Preparing the Remote Control Unit Installing the batteries Remote control operation range 1. Place your finger on the part marked with the ▲, and The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ then pull the cover off.

  • Page 16: Mounting A Web Camera

    Mounting a web camera It is possible to mount the PN-ZCMS1 Video-Conferencing Soundbar (optional) or a commercially available web camera. 1. Remove the screws from this monitor. 2. Attach the camera mount (supplied) with the camera mount screw (M3 x 10) (supplied) (x2). 3.

  • Page 17: Attaching The Wireless Adapter

    Attaching the wireless adapter Wireless adapter 1. Remove the bottom cover. 2. Attach a wireless adapter. Take note of the direction of the wireless adapter. The surface with the * mark is the front. TIPS • Store the removed cover and screws. After removing the wireless adapter, put back the cover, and fasten it with the removed screws.

  • Page 18: Turning Power On/Off

    Turning Power On/Off Turning power on Caution • Turn on the monitor first before turning on the computer or 1. Press the POWER button. playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction.

  • Page 19: Turning Power Off

    Turning Power On/Off n O perations after first power-on Turning power off When you turn on the power for the first time, the language 1. Press the POWER button on the remote control unit. settings screen appears. Or, press and hold the POWER button on the monitor. 1.

  • Page 20: Touch Pen

    Touch Pen Pen tip (thick) Pen tip (thin) The following software recognizes the side of the touch pen that is touching the screen, enabling the two sides to be used as different pens. • Whiteboard For details on how to use the touch pen in Whiteboard, refer to “Whiteboard” (see page 29). TIPS •...

  • Page 21: Touch Action

    Touch action Touch action Cautionary points • Do not use the touch pen for any purpose other than touch Touch actions that can be used with this monitor differ panel operation. according to operating system and application. The functions • Do not press hard on the pen tip. of touch actions are also different.

  • Page 22: Basic Operation

    Basic Operation About the home screen of APPLICATION mode This appears when the input mode is changed to APPLICATION. Start “Whiteboard”. (See page 29.) Start “Bytello Share”. (See page 35.) Start “Web Browser”. (See page 40.) Start “File Explorer”. (See page 38.) Display the list of applications.
  • Page 23 Basic Operation (2) When you touch the screen, “ ” “ ”, and “ ” appear. Touch to view the toolbar. Go back to previous screen.* Return to home screen of APPLICATION mode. Display a preview of the application being executed and the last external input. (See below.) * Display “Input”...

  • Page 24: Using The Remote Control Unit

    Basic Operation Using the remote control unit 5. VOLUME +/- (Volume adjustment) Press + or - to adjust the volume. 6. INFORMATION Displays monitor information. XXXXXXXX X.X.X XXXXXXXX XXXX-XXXXXX-XX-XXXX XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX The display changes from “Information1” → “Information2” → clear display, and so on every time you press this button.
  • Page 25 Basic Operation 10. Buttons for operating the HDMI-connected device 18. MENU If “HDMI CEC Link” is set to on, you can operate devices that Displays the Common Settings menu screen. (See page 42.) support HDMI CEC when the input mode is HDMI1. 19.
  • Page 26 Basic Operation n S witching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. Wide Displays image so it fills the entire screen. Normal Displays the image so it fills the screen without changing the aspect ratio. Dot by Dot Displays the dots of the input signals as the corresponding dots on the screen.

  • Page 27: Overlay Board (Mark)

    Basic Operation Overlay board (Mark) You can draw characters or lines on the images being displayed on this monitor. Touch on the toolbar. Operation bar Tool Function Draw a line. You can change the settings (color). Draws a line without hiding objects under the line. You can change the settings (color). Brush Clear all the drawn lines.

  • Page 28: Freeze

    Basic Operation Freeze Freezes the video shown on the monitor. Either press the FREEZE button on the remote control unit, or touch on the toolbar. In the case of a still image, is displayed at the top right of the screen. Settings window Settings window: Touch to operate.

  • Page 29: Whiteboard

    Whiteboard • You can write letters or draw lines on the screen as a whiteboard. • You can print or save content written on the screen. • You can display an image or PDF file, and write/draw letters and lines on the image. •...
  • Page 30 Whiteboard n Function list Tool Function Draw lines. (See page 31.) Pen palette 1 Pen palette 2 Pen palette 3 Erase a line that you drew. (See page 31.) This appears when “Draw with pen and finger” is selected. (See page 34.) Touch to perform gesture actions (enlarging/reducing, moving a sheet, etc.).

  • Page 31: Drawing

    Whiteboard Drawing The line/eraser setting is assigned to each touch pen (thin/thick) and finger. Operate with what you use to draw. 1. Touch one of “Pen palette 1” to “Pen palette 3”. If the line you want to draw does not exist, touch one of “Pen palette 1” to “Pen palette 3” twice. You can change the line setting (non-transparent/transparent, thickness, color).

  • Page 32: Actions Using Your Finger (Gesture)

    Whiteboard Actions using your finger (gesture) Enlarge/reduce a sheet Moving the display position of a sheet Move to the previous/next* sheet (when enlarged) Pinch-in/pinch-out Swipe Left/right flick * Add a new sheet when the last sheet is being displayed. (Up to 10 sheets) When drawing with a touch pen (supplied) (When “Draw only with pen”...

  • Page 33: Saving A Sheet

    Whiteboard Saving a sheet You can save a sheet in dedicated SDSW format or PDF format. You can save the sheet to this monitor’s built-in memory (internal memory) or to a USB flash drive. TIPS • When you save a sheet in SDSW format, you can open the sheet in this application and re-edit the sheet. •...

  • Page 34: Settings

    Whiteboard Settings n Drawing with your finger (Draw with pen and finger) / Drawing with only a touch pen (Draw only with pen) 1. Touch 2. To draw with your finger: Touch “Draw with pen and finger”. You can now draw with a touch pen and your finger. Touch before performing a gesture.

  • Page 35: Bytello Share

    Bytello Share • You can display the image of another device on the same network on this monitor. • Connections to all devices is not guaranteed. • If the display is delayed, reduce the connected devices. • “Bytello Share” is an application of Guangzhou Shirui Electronics Technology Co., Ltd. Functions may change due to updates by Guangzhou Shirui Electronics Technology Co., Ltd.
  • Page 36 Bytello Share 2. Enter the connection code displayed on this monitor. This monitor and the device are connected. • Screen Share ............Displays the device screen. • Media ..............Displays or plays back the videos and music saved in the device. •...

  • Page 37: Pdf Viewer

    PDF Viewer Starts when a PDF file is opened on an application such as “File Explorer”, etc. (1) Displays the PDF. Zoom-in or zoom-out the display by pinching. Magnify the display by double-tap. Displays the current page / total number of pages. Performs printing.

  • Page 38: File Explorer

    File Explorer Manages the files and folders in the internal storage and the USB flash drive connected to the monitor. You can also display or play back the files. 1. On the home screen of APPLICATION mode, touch “File Explorer”. Select the device to display.
  • Page 39 File Explorer nSupported formats You can play image, music, and video files. The types of files that can be played are as follows. Image files Extension Max. resolution *.bmp *.jpg (*.jpeg) 3840x2160 *.png • Progressive JPEG files are not supported. Music files Extension Audio coding...

  • Page 40: Web Browser

    Web Browser Browses the home page. 1. On the home screen of APPLICATION mode, touch “Web Browser”. Exiting Close the Web Browser from the recent app bar. TIPS • If a large-sized website is displayed, the Web Browser may close. Caution •...

  • Page 41: Updating The Software (Update)

    Updating the Software (Update) Update applications that are factory-installed in APPLICATION mode. (A network environment that allows access to the internet is required.) On the home screen of APPLICATION mode, touch “All Apps”, and then touch “Updater”. When you use Updater, a password is required. (Factory setting) (See page 45.) The “Export Law Assurances”...

  • Page 42: Common Settings Menu

    Common Settings Menu Displaying the menu screen Adjusts the images and sound. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. n Example of operation 1. On the home screen of APPLICATION mode, select “Common Settings”. Or, press the MENU button on the remote control unit.
  • Page 43 Common Settings Menu n Screen H Position (D-SUB) Adjust the horizontal position of the image. V Position (D-SUB) Adjust the vertical position of the image. Clock (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 44), make adjustments so that no vertical stripe noise appears in it.

  • Page 44: Adjustments For Computer Screen Display

    Common Settings Menu Adjustments for computer screen display nAutomatic adjustment When you use the “D-SUB” to display a computer screen for the first time, or when you change the setting of the computer, use the automatic screen adjustment. 1. Switch the input to “D-SUB” and display the adjustment pattern.

  • Page 45: Administrator Settings Menu

    Administrator Settings Menu Displaying the menu screen Makes settings for this monitor. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. Touch to operate. 1. On the home screen of APPLICATION mode, touch “Administrator Settings”. •...

  • Page 46: Menu Item Details

    Administrator Settings Menu Menu item details n Setup Monitor Lock Admin Password Sets whether or not a password is necessary when using “Administrator Settings”, “FUNCTION”, and “Updater”. Operation Mode “Mode1” is the recommended setting and conforms to the “Normal Configuration” as defined in the EcoDesign Regulation (2019/2021).
  • Page 47 Administrator Settings Menu n I nput & Output Sound Audio Output Sets the volume of sound output from the audio output terminal. Variable1 ..... You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously by using “Volume”. Variable2 .....
  • Page 48 Administrator Settings Menu Language & Keyboard Language Sets the display language for the screen. Virtual Keyboard Selects the keyboard to display on the screen. Physical Keyboard Displays information about the physical keyboard used. Current Keyboard Sets the language for the physical keyboard being used. Show Virtual Keyboard ......
  • Page 49 Administrator Settings Menu nSchedule You can set the time to switch the monitor on and off. Set this function with “Startup & Shutdown” in the System menu. (See page 48.) 1. To turn the power ON at the specified time, touch “Add Power On Schedule”.

  • Page 50: Reset/Functional Restriction Setting (Function Menu)

    Reset/Functional Restriction Setting (FUNCTION Menu) You can reset the settings to the factory default settings User Apps Installation or restrict operations. When you use FUNCTION menu, a Sets whether or not to allows the installation of password is required. (Factory setting) (See page 45.) applications by the apk file.

  • Page 51: Controlling The Monitor With A Computer (Rs-232C)

    Controlling the Monitor with a computer (RS-232C) Communication procedure You can control this monitor from a computer via RS-232C (COM port) on the computer. nCommand format Computer connection When a command is sent from the computer to the monitor, the monitor operates according to the received command and Connect with RS-232 straight cable between the computer’s sends a response message to the computer.
  • Page 52 Controlling the Monitor with a computer (RS-232C) nResponse code format nCommunication interval When a command has been executed correctly • After “OK” or “ERR” is returned, you must send the following commands. Return code To set a timeout for the command response, specify 10 , 0A seconds or longer.

  • Page 53: Rs-232C Command Table

    Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 51.) Direction: W When the “Parameter” is set in the parameter field (see page 51), the command functions as described under “Control/Response Contents”.
  • Page 54 Controlling the Monitor with a computer (RS-232C) Function menu Function Command Direction Parameter Reply Control/Response contents Monitor Lock ALCM 0-3 0: Off, 1: Power Button & Touch, 2: Power Button, 3: Touch Remote Control Lock ALCR 0-2 0: Off, 1: All, 2: Except Power & Volume All Reset RSET 0: All Reset...

  • Page 55: Troubleshooting

    Troubleshooting The video from the HDMI input terminal does not appear If you are experiencing any problem with your display, before properly. calling for service, please review the following troubleshooting tips. • Does the HDMI cable support 4K, and is it HDMI standard compliant? The monitor will not work with cables that are There is no picture or sound.
  • Page 56 Remove dust if • When the internal temperature of the monitor rises possible. Ask SHARP dealer about removing internal dust. excessively, the brightness of the backlight automatically decreases in order to prevent a further temperature rise. If No sound is heard from the speaker.

  • Page 57: Specifications

    When no optional part is attached. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from...
  • Page 58 When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M8 screws and tighten the screws. Note that screw hole depth of the monitor is 1/2 inch (12 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product.
  • Page 59 Specifications nCompatible signal timing (PC) Digital Analog Screen resolution Hsync Vsync Dot frequency USB-C HDMI D-SUB (DisplayPort) VESA 640 × 480 31.5kHz 60Hz 25.175MHz 800 × 600 37.9kHz 60Hz 40.0MHz 1024 × 768 48.4kHz 60Hz 65.0MHz 1280 × 960 60.0kHz 60Hz 108.0MHz 1280 ×...
  • Page 60 Specifications nCompatible signal timing (AV) Screen resolution Frequency HDMI USB-C 4096 × 2160p 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 3840 × 2160p 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 1920 × 1080p 24Hz 50Hz 59.94Hz 60Hz 1920 × 1080i 50Hz 59.94Hz 60Hz 1280 ×...
  • Page 61 Specifications nChannels that can be used in wireless LAN Frequency band Standard Channel (center frequency) IEEE802.11ax/n/g/b 1-13ch 2412-2472MHz IEEE802.11ax/ac/n/a 36/40/44/48ch 5180-5240MHz 52/56/60/64ch 5260-5320MHz 100/104/108/112/116/120/124/128/132/136/140ch 5500-5700MHz • Outdoor use of the 5 GHz band is restricted by the Radio Law.

  • Page 62: Intellectual Property Rights And Other Matters

    The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.

  • Page 63: Mounting Precautions (For Sharp Dealers And Service Engineers)

    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. (PN-L652B: at least 2 people.) • Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
  • Page 64 PN-L862B-L752B-L652B Me EN22B(3)

This manual is also suitable for:

Pn-l752bPn-l652b

Table of Contents