Touch Panel / Touch Pen Preparations; Connecting The Touch Pen Adapter; Touch Pen Preparations; Computer Preparations - Sharp PN-L705H Operation Manual

Touch Panel / Touch Pen Preparations

Connecting the touch pen adapter

To use the touch pen, insert the touch pen adapter into the
touch pen adapter port on the monitor.
Touch pen
adapter port
Touch pen
adaptor

Touch Pen Preparations

nInserting the battery
1. Remove the battery cap and main cover.
2. Open the battery cover and insert the supplied battery
(LR-03 ("AAA" size) x 1) into the touch pen.
Check the plus (+) and minus (-) markings on the inside
of the touch pen and insert the battery in the correct
orientation.
3. Replace the battery cover and main cover.
While pressing the battery cover, replace the main cover.
1
4. Replace the battery cap.
Touch pen
adapter screw
(antitheft)
1
2
Main cover Battery cap
Battery cover
2
2
1
TIPS
• The supplied battery (LR-03 ("AAA" size)) may be
exhausted in a short time, depending on how it was stored.
• If the touch pen will not be used for an extended time,
remove the battery from the touch pen.
• For the battery, use an alkaline battery.

Computer preparations

To use the touch panel, the touch pen and the eraser, install
the software below.
• Touch pen Management Tool
• Pen Software
To install the software, see the manual for each.
19
E