Table of Contents
Advertisement
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp: 2
Cable clamp (for power cord): 1
Power cord: 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
nConnected equipment
Hardware
OS
nSupplied Software (Windows)
CPU
Memory
Free space on hard drive
To use the touch panel, connect the USB cable (supplied) to your computer.
The touch panel operates with the standard driver of each OS. On the Mac, operation is only possible in mouse mode.
Pen Software can be installed from the supplied CD-ROM.
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
Download the setup program for the Sharp Display Connect and Touch Viewer with the Information Display Downloader.
To install and use the software, see the manual for each.
10
E
Supplied Components
Remote control unit battery
(R-03 ("AAA" size)): 2
CD-ROM (Utility Disk): 1
Sharp Display Connect License: 1
Setup Manual: 1
Touch pen: 1
Tray: 1
Tray mounting screw (M3) : 5
Eraser: 1
USB cable: 1
System Requirements
Model with a USB 2.0 port and able to output a resolution of 1920 x 1080
Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),
Windows 10 (32-bit or 64-bit version)
Mac OS X v10.11, macOS v10.12
Google Chrome OS Version 39 or later
Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
At least 2 GB
At least 200 MB (free space separately required for data storage)
Camera mount: 1
Camera mount screw (M3): 2
Camera screw (inch thread): 1
Stand hole protection cover: 2
Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
Advertisement
Table of Contents
