Sharp PN-L705H Operation Manual page 34

Menu Items
nSETUP
DATE/TIME SETTING
Set the date and time. Press the
numerical values.
Set the date in "Month/Day/Year" order.
Set the time on a 12-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE ..................MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
(YYYY: Year, MM: Month, DD: Day)
TIME ...................Select 12- or 24-hour time.
SCHEDULE (See page 40.)
You can turn the power on/off and change the screen brightness at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
D-SUB
Select the input mode to be used in D-Sub input terminal.
HDMI CEC LINK
AUTO ............Use the HDMI CEC function.
If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to
HDMI when playback starts on the device.
OFF ...............HDMI CEC function is not used.
AUTO POWER ON
This can be set when HDMI CEC LINK is set to AUTO.
If the device connected to the HDMI input terminal supports CEC, you can specify whether or not the monitor power turns on
when the device power is turned on.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted automatically according to the screen size control signal included in the
video signal input from the HDMI1 to HDMI3 input terminals and expansion slot (when the expansion function is used).
DisplayPort STREAM
Set how DisplayPort is used.
If a device that is not DisplayPort1.2 compliant is connected, set to SST1.
SST1 ....Use as single stream (DisplayPort1.1).
SST2 ....Use as single stream (DisplayPort1.2).
MST ...... Only DisplayPort2 can be set.
Use as multi-stream (DisplayPort1.2).
(This may not display correctly, depending on the computer (video card) that is connected.)
HDMI MODE
Use MODE1 normally.
If video is not displayed correctly when one of the HDMI1 to HDMI3 input terminals is used, such as when a device that is
not 4K compliant is connected, set to MODE2.
Also set MODE2 when the connected device supports 4K but only supports vertical frequencies 50/60 Hz and YCbCr 4:2:0.
INPUT MODE NAME
For each terminal, you can change the input mode name that is displayed during input mode selection or display.
The names of INPUT1 to INPUT6* can be changed. (*Factory default.)
(1) Select the input mode name (INPUT1 to INPUT6) that you want to change, and press the ENTER button.
If the input mode name can be changed, "EDIT: [ENTER]" will appear.
(2) Move the cursor to the character that you want to change with the
button.
Change the character type with the MODE button (upper case alphabet, lower case alphabet, numbers, symbols).
(3) When you have finished the change, press the ENTER button.
Up to 18 characters can be used.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
34
E
or button to select the date and time, and press the or button to change the
or button, and change the character with the or